| Stegmeier’s Cantilever forms are foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires. Set up time is minimal (usually the morning of the pour) and they may be removed early while the concrete is still wet enough to “slick finish” with a foam profile edging tool. The tie wires are positioned approximately 6″ apart and are designed to sever below the surface of the concrete. Check local building codes before using this product.
Flexibility
Stegmeier’s forms conform easily to most free-form designs but can be bent to a tight radius using the bending tape provided.
|
|
 |
 |
|
|
|
|
|
|
| Part # | 6″ Regular Profile |
| 61CF000 | Form Only |
| 61CF011 | White Tile Strip – No Tie Wire |
| 61CF111 | Tie Wire – No Tile Strip |
| 61CF112 | White Tile Strip |
| 61CF122 | Grey Tile Strip |
| 61CF132 | Tan Tile Strip |
| 61CF162 | Black Tile Strip |
| Quantity: | |
| 10 | Regular Form (8′ lengths) |
| 10 | Tile Strip (8′ lengths) |
| 2 | Tie Wire Side Kit |